Standard Wall Mount Bench

Model Number

SWB-14A Seat Support | 2 x 4 Re-plast Planks

Standard Wall Mount Bench

This tried-and-true design has been requested time and time again for applications where customers are looking for a low maintenance and sterile option instead of wood and steel.  Primarily used in washroom and change room environments, this simple design works great, whether the seating requirement is large or small. Determining what is required for every application is simple.  The number of supports (SWB-14A) is determined by the total length of the seating surface minus 4” overhang on each end and then dividing up the difference to maximum span distances of 20”. For example,  a 72” bench would have 4 supports 16“ apart from each other.  A 60” bench would have 3 supports 17” apart from each other.  A 48” bench would have 3 supports 20” apart from each other. The recycled plastic lumber comes in 3 lengths:  6ft, 10ft and 12ft.  The seating surface utilizes 4-

2 x 4  boards giving a comfortable 14” seating depth. Note that there is an optional bullnose board for the leading edge making the seating even more comfortable.



Product Specifications

100% Recycled Plastic Slats

  • Planks Actual Size 1 7/16 x 3 3/8
  • Standard Lengths are 6,10 and 12Ft
  • This product will not rot, splinter, or warp reducing maintenance costs over the life of the product.
  • Colours Available: Black, Grey, Redwood, Sand, Walnut

Durable Powder Coated Aluminum Supports

  • Spacing Between the Supports NOT TO EXCEED 20”
  • Standard Colours: Brown Slate, Victor Ridge II, Nordic Lichen, Timeless Rust, Grey Gold, Textured Silver, Precious Sand, Groovy Red, Black Textured, Earth Clay, Noble Bronze, Modern Khaki, Flame Red, Pastel Orange, Signal Violet, Traffic Yellow, Ultramarine Blue, Water Blue, Yellow Green

Customized Solutions

  • Custom Powder Coating (Setup Charges May Apply)

  • Factory Assembled with Lumber Already Installed

  • 2 x 6 Recycled Plastic Planks. (Must specify)

  • Stainless Mounting Hardware for Wall Mount and Lumber is Available but Sold Separately

  • Stainless Mounting Hardware for Wall Mount and Lumber is Available but Sold Separately

Product Dimensions

Seat Support SWB-14A

Depth : 13.5 inches / 343 mm
Height : 15 inches / 381 mm
Weight : 2.5 lbs/ 1 kg

Re-plast Lumber

Thickness : 1 7/16 inches / 38 mm
Depth : 3 3/8 inches / 86 mm
Weight : 2 lbs/ft 3.2 kg/meter

Recycled Content

  • Recycled Content By Weight (5 ft bench): 86%
  • 100% Recyclable

Complimentary Products In This Series

Wishbone Site Furnishings
#210-27090 Gloucester Way
Langley, BC CANADA V4W 3Y5
866.626.0476 | [email protected]
site by thejrp