Skyline Wall Bench

Model Number: 11”H | SLWB-11S Seat Support | SLWB-11E Seat End | 2 x 6 Re-plast Planks

Skyline Wall Bench

Designer Notes

The Skyline series emphasizes the simplicity of many modern architectural styles, and the top wall-mounted bench is no different. Elegant in its design and simple in its execution, this bench system is customizable to any top wall mounted application. Most commonly installed on top of a concrete wall feature or plinth, this type of bench can be incorporated almost anywhere alongside buildings and architectural features. Each bench requires 2 ends (BVWB-11E). The number of supports (BVWB-11S) required is determined by the total length and dividing it up to a maximum span distances of 20”. For example,  a 72” bench would have 3 supports 18“ apart from each other and a 60” bench would have 2 supports 20” apart from each other.  The lumber comes in 3 lengths  6ft, 10ft and 12ft.  The seating utilizes 3 boards deep giving a comfortable 17” seating surface.

Available Recycled Plastic Lumber Colours











  • Product Specifications:

    100% Recycled Plastic Slats

    • Planks Actual Size 1 7/16 x 5 3/8
    • Standard Lengths are 6,10 and 12Ft
    • This product will not rot, splinter, or warp reducing maintenance costs over the life of the product.
    • Colours Available: Black, Grey, Redwood, Sand, Walnut

    Durable Powder Coated Aluminum Supports

    • Spacing Between the Supports NOT TO EXCEED 20”
    • Standard Colours: Brown Slate, Victor Ridge II, Nordic Lichen, Timeless Rust, Grey Gold, Textured Silver, Precious Sand, Groovy Red, Black Textured, Earth Clay, Noble Bronze, Modern Khaki
    • Three standard heights.
      6”   Seat End SLWB-6E   Seat Support SLWB-6S
      8”   Seat End SLWB-8E   Seat Support SLWB-8S
      11" Seat End SLWB-11E  Seat Support SLWB-11S

    Long Lasting Stainless Steel Hardware

  • Customized Solutions:
    • Custom Powder Coating (Setup Charges May Apply)

    • 2 x 4 Recycled Plastic Planks. (Must specify)

    • Bolt on Arm Rests (SLWM-ARM)

    • Customizable to any Length

    • INST-1 Stainless steel bolt down kit ( Installation Example )
  • Product Dimensions:

    Skyline Wall Bench End Support dmSeat End SLWB-11E

    Seat Depth : 16.5 inches/419 mm
    Base Depth : 9 inches/229 mm
    Height Including Lumber : 11 inches/279 mm
    Weight : 2 lbs/.9 kg

    Skyline Wall Bench Seat Support smSeat Support SLWB-11S

    Seat Depth : 16.5 inches/419 mm
    Base Depth : 16.5 inches/419 mm
    Height Including Lumber : 11 inches/279 mm
    Weight : 2 lbs/.9 kg

    Re-plast Lumber

    Thickness : 1 7/16 inches/38 mm
    Depth : 5 3/8 inches/138 mm
    Weight : 3.2 lbs/ft 4.6 kg/meter

  • Recycled Content:
    • Recycled Content By Weight (5 ft bench): 86%
    • 100% Recyclable
  • pdfCleaning and Maintenance Instructions

  • pdfWishbone Limited Warranty

  • pdfWishbone Shipping Information

  • Renew your Recycled Plastic

  • Wall Seating


  • Wishbone Site Furnishings
    #210-27090 Gloucester Way
    Langley, BC CANADA V4W 3Y5
    866.626.0476 |
    site by thejrp