Skyline Wall Bench

Model Number: 11”H | SLWB-11S Seat Support | SLWB-11E Seat End | 2 x 6 Re-plast Planks

Skyline Wall Bench

Designer Notes

The Skyline series emphasizes the simplicity of many modern architectural styles, and the top wall-mounted bench is no different. Elegant in its design and simple in its style, this bench system is customizable to any top wall-mounted applications. Most commonly installed on top of a concrete wall feature or plinth, this type of bench can be incorporated alongside buildings and architectural features. Each bench requires two ends (BVWB-11E). The number of supports (BVWB-11S) required is determined by the total length and dividing it up to a maximum span distances of 20”. For example,  a 72” bench would have 3 supports 18“ apart from each other and a 60” bench would have 2 supports 20” apart from each other.  The lumber comes in 3 lengths: 6ft, 10ft and 12ft.  Seats are three boards deep, giving a comfortable 17” seating surface.

Available Recycled Plastic Lumber Colours











  • Product Specifications:

    100% Recycled Plastic Slats

    • Planks Actual Size 1 7/16 x 5 3/8
    • Standard Lengths are 6,10 and 12Ft
    • This product will not rot, splinter, or warp reducing maintenance costs over the life of the product.
    • Colours Available: Black, Grey, Redwood, Sand, Walnut

    Durable Powder Coated Aluminum Supports

    • Spacing Between the Supports NOT TO EXCEED 20”
    • Standard Colours: Brown Slate, Victor Ridge II, Nordic Lichen, Timeless Rust, Grey Gold, Textured Silver, Precious Sand, Groovy Red, Black Textured, Earth Clay, Noble Bronze, Modern Khaki
    • Three standard heights.
      6”   Seat End SLWB-6E   Seat Support SLWB-6S
      8”   Seat End SLWB-8E   Seat Support SLWB-8S
      11" Seat End SLWB-11E  Seat Support SLWB-11S

    Long Lasting Stainless Steel Hardware

  • Customized Solutions:
    • Custom Powder Coating (Setup Charges May Apply)

    • 2 x 4 Recycled Plastic Planks. (Must specify)

    • Bolt on Arm Rests (SLWM-ARM)

    • Customizable to any Length

    • INST-1 Stainless Steel Bolt-Down Kit ( Installation Example )
  • Product Dimensions:

    Skyline Wall Bench End Support dmSeat End SLWB-11E

    Seat Depth : 16.5 inches/419 mm
    Base Depth : 9 inches/229 mm
    Height Including Lumber : 11 inches/279 mm
    Weight : 2 lbs/.9 kg

    Skyline Wall Bench Seat Support smSeat Support SLWB-11S

    Seat Depth : 16.5 inches/419 mm
    Base Depth : 16.5 inches/419 mm
    Height Including Lumber : 11 inches/279 mm
    Weight : 2 lbs/.9 kg

    Re-plast Lumber

    Thickness : 1 7/16 inches/38 mm
    Depth : 5 3/8 inches/138 mm
    Weight : 3.2 lbs/ft 4.6 kg/meter

  • Recycled Content:
    • Recycled Content By Weight (5 ft bench): 86%
    • 100% Recyclable
  • pdfCleaning and Maintenance Instructions

  • pdfWishbone Limited Warranty

  • pdfWishbone Design Ethic

    pdfWishbone Limited Warranty

  • Wishbone Design Ethic

  • Wall Seating


  • Wishbone Site Furnishings
    #210-27090 Gloucester Way
    Langley, BC CANADA V4W 3Y5
    866.626.0476 |
    site by thejrp